Fitment:
Fits Ford : (Please check your vehicle compatibility before buying)
1999-2010 Ford F250 F350 Super Duty with 3-1/2 inch diameter axle tube (NOT fit models equipped with overload springs or dually models);
2011-2022 Ford F250 F350 with 3-1/2 inch diameter axle tube (4wd only) (Exc. Airbag Suspension Systems; Exc. Factory Overload Springs) not fit 2-PC DRIVE SHAFT.
Specification:
Auto Part Position: Rear
Material: Alloy Steel
Lifting Height: 2 Inches
Block width: 70mm
U bolts thread Pitch: M16X1.5
U bolts length: 15.55"
Please note:
Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.
This lift kit will raise the rear of your Ford by a true 2".
Profession installation is highly recommended.
2'' height block to replace the factory block to achieve different rear lifting
Powder coated black Tapered Fabricated Steel with cross support better than others' casting iron and aluminum blocks.
Internal Reinforced cross ensure stronger support.
The leaf springs U bolts is Longer than original bolts with 10.9 grades and M16x1.5 thread pitch, more suitable for tuner.(If they are too long, you could cut them as needed.)
Benefits : Maintain factory ride quality; Increased ground clearance; Levels the front with the rear; Fit larger rims and tires.easy to be installen in about 1 hours.
Perfect solution for towing and hauling, An alignment recommended after install