Aluminum Shroud+Fan For Dodge Plymouth Mopar Cars L6 V8 1968-1974 26" Wide Core

CC375-DFZX

Aluminum Shroud+Fan For Dodge Plymouth Mopar Cars L6 V8 1968-1974 26" Wide Core

CC375-DFZX

Price
$129.00
$129.00
Save $0.00
Quantity
Please check the compatible vehicles below.
Please check the size before you buy.
There are warehouses in America.
One year warranty.

Application:
For 1970-1974 Dodge Challenger 26" Wide Core
For 1970-1971 Dodge Sapporo 26" Wide Core
For 1968-1972 Dodge Charger 26" Wide Core
For 1968-1972 Dodge Coronet 26" Wide Core
For 1968-1973 Plymouth Road Runner 26" Wide Core
For 1970 Plymouth Belvedere 26" Wide Core
For 1968-1973 Plymouth Satellite 26" Wide Core
For 1970-1973 Plymouth Barracuda 26" Wide Core
Will Fit Automatic or Manual Transmissions


Please Notice:
This Listing Is Including One Aluminum Shroud and Two 12"Fans (Includes fans mounting kits)


Fans Configuration:
Performance JDM Spec. Racing Design
OE Fitment or Replacement, Push or Pull Type
Maximum Fan CFM: 1730 cfm
Fan Diameter (in): 12.050”
Thickness (in): 2.500”
Number of Blades: 10 blades
Maximum Fan RPM: 2,250 rpm
Blade Material: Plastic
Amp Draw: 12.70 amps
Includes the Mounting Tabs for an Easy Zip Tie Installation
Shroud+Fans
The fan and the fan shroud effectively drive the heat over and out the engine compartment rather than thrusting it into the front of the engine. The fan shroud basically houses the fan blades securing it in place and keeping it from damaging the other engine components that may disturb the smooth and even operation of the engine. With excellent operating temperature management, allowable levels of engine temperature are stabilized. Investing in proper maintenance though will considerably benefit the ride and driving quality in maintaining the ideal working conditions of the engine.

How about your delivery cost?

- Free shipping within the United States (exclude remote areas Alaska, Hawaii)

  • Shipping cost is USD150 for Alaska, Hawaii

The delivery cost will be automated calculated in your shopping cart after you enter your state. It depends on the automatic calculation of weight and package sizes by reference to the destination. The calculation results are different under the same weight in different areas.

If the item damaged, stolen, we will contact the corresponding shipping company for a refund or redelivery.

 

Where the product can be delivered?

Currently, we only ship to US addresses. All product is stocked in our US warehouses, and all products will be directly shipped from our US warehouses.
Undeliverable areas: Guam, Puerto Rico, pr address and military address.

 

Which carrier will be used and the estimated shipping time?

We use USPS or FedEx depending on your location and the fastest available service. The estimated shipping time is 3-5 days.

Due to the current Covid-19 pandemic worldwide these are only estimates. We will always use the fastest option to get your order to you as quickly as we can, but there are factors beyond our control that may delay your order.

 

How do we ship your orders?

We ship out the order within 2-3 days after payment. There will be a tracking number after we ship the order, tracking number will be sent to your email.

We will ship them to the shipping address you left, please make sure your address and receiver name are correct (Notice: PO Box address is not accepted).

In the unlikely event that you do not receive your order, please contact us so we can order a replacement or give you a gift/discount code to make things right! Please wait 4 weeks before contacting us if you do not receive your order.

 

How about changing your shipping address?

During Contact Center Hours: For the first 60 minutes after the order is placed, buyers can change shipping address by calling our customer service department at +86 15221202562 or e-mail us at cs@alloyworksplus.com. After 60 minutes your order is too far along in the shipping process to change it.

Please note – orders placed outside of our customer service department hours cannot be changed as our customer service team is not available to cancel the order. Orders placed outside of Customer Service Hours are sent directly to our fulfillment center to be packaged and shipped.

Outside Customer Service Hours: Mon - Fri: 2 pm - 10 pm EST

If you cannot pick the unit up from the original address, the carrier will attempt to deliver up to 3 times and then hold your package at the closest FedEx or UPS office for 5 days.

If you cannot pick it up there, it will be sent back to our warehouse.

 

How can I track my order?

Once your order has been shipped, you’ll receive a confirmation email with the tracking information. Should you come across any issues with tracking your package, please feel free to reach out to us at cs@alloyworksplus.com, and we’ll work to resolve the issue as soon as possible.

For any issues pertaining to your order, please reach out to us at cs@alloyworksplus.com, and we’ll work with the mail courier to investigate further into the status of your order.

We stand by our products with a satisfaction guarantee - if you are not satisfied with any AlloyWorks product, simply return the product within 30 days for a full refund. By agreeing to the terms of purchase you also agree to this refund policy.

 

Contact details:

E-mail: cs@alloyworksplus.com

Tel.: +86 15221202562

Company Address: Room 501, Building 5, No. 115, Lane 1276, Nanle Road, Songjiang District, Shanghai, China

 

We guarantee the quality of the products of "ALLOYWORKS" for a period of 12 months from the factory date. If there is an issue with product quality or if it cannot be used as it is intended to be used during the warranty period, you can return the product free of charge. We will not, however, assume responsiblity for any other fees or losses.

Before shipping out, all goods have been double verified by alloyworksplus.com. Our test engineer will check for quality, including check the basic function, the appearance, the packing, the necessary accessories.

Unfortunately, if any of the following apply, your order will not be covered by our warranty.
(1) The product has been disassembled without authorization and/or reassembled or reconstructed thereafter;
(2) Damage to the product were caused in the installation process;
(3) The product was not used according to the instructions in the installation and maintenance manual, or the product is damaged by human factors.