- ${item}

Select a vehicle to verify fitment
Select a vehicle to verify fitment
Select a vehicle to verify fitment
Select a vehicle to verify fitment
Vehicle Fitment:
2018-2018 Honda Accord L4 1.5L Turbocharged EX Model, EX-L Model, LX Model, Sport, Touring
2018-2022 Honda Accord L4 2.0L Naturally Aspirated
2018-2022 Honda Accord L4 2.0L Turbocharged
2019-2020 Honda Accord L4 1.5L Turbocharged
2021-2021 Honda Accord L4 1.5L Turbocharged EX-L Model; LX Model; Sport SE; Touring
2022-2022 Honda Accord L4 1.5L Turbocharged
Specifications:
Components Included: Receiver/Drier
Configuration: Parallel Flow Condenser
Core Height (IN): 12.9
Core Length (IN): 28.9
Core Thickness (IN): 0.47
Inlet Diameter (IN): 0.61
Outlet Diameter (IN): 0.4
Inlet Fitting Design: Block Fitting
Outlet Fitting Design: Block Fitting
Replacement Part Number: 30099, CN30099PFC, 80100TVAA02, 80100TVAA01, 80100TWAA01
The air-conditioning condenser is located between the car's grille and the engine-cooling radiator in which the gaseous refrigerant sheds heat and returns to a liquid state. The liquid refrigerant flows to the evaporator inside the dashboard, where it cools the cabin.
The condenser works as a car radiator by dissipating out heat but also cooling the high-pressure refrigerant gas, so it forms into a high-pressure liquid, then gets streamed to the receiver-dryer until it continues to the expansion valve.
How to Replace AC Condenser:
Step 1: Discharging and recovering the AC refrigerant.
Step 2: Condenser removal and replacement.
Step 3: Remove parts that are in the way of the condenser.
Step 4: Take off the A/C lines that run to the condenser.
Step 5: Take off the condenser.
Step 6: Install a new condenser.
Step 7: Install the A/C lines and replace the o-rings.