(function(){
let w = window.innerWidth;
function setHeaderCssVar() {
const headerEle = document.getElementById('shoplaza-section-header');
if(!headerEle){ return };
document.body.style.setProperty('--window-height', `${window.innerHeight}px`);
document.body.style.setProperty('--header-height', `${headerEle.clientHeight}px`);
const mdScorllHideEle = headerEle.querySelector('.header__mobile .header__scroll_hide');
if (mdScorllHideEle) {
document.body.style.setProperty('--header-scroll-hide-height-md', `${mdScorllHideEle.clientHeight}px`);
}
const pcScorllHideEle = headerEle.querySelector('.header__desktop .header__scroll_hide');
if (pcScorllHideEle) {
document.body.style.setProperty('--header-scroll-hide-height-pc', `${pcScorllHideEle.clientHeight}px`);
}
}
function handlResize() {
if(w == window.innerWidth){return};
w = window.innerWidth;
setHeaderCssVar();
};
function init(){
setHeaderCssVar();
window.removeEventListener('resize', window._theme_header_listener)
window._theme_header_listener = handlResize;
window.addEventListener('resize', window._theme_header_listener);
}
init();
})();
Search Vehicle
search
${data.index + 1}/9
Description
Fitment
Shipping
Warranty
Select a vehicle to verify fitment
Check
This Part Fits Your Vehicle
This Part May Not Fit
Please check if this fits your vehicle before purchasing
Select a vehicle to verify fitment
Check
This Part Fits Your Vehicle
This Part May Not Fit
Select a vehicle to verify fitment
Check
This Part Fits Your Vehicle
This Part May Not Fit
Select a vehicle to verify fitment
Check
This Part Fits Your Vehicle
This Part May Not Fit
Description
Vehicle Compatibility
For 2007-2010 Dodge Ram 2500 (6.7L Turbo Diesel) For 2007-2010 Dodge Ram 3500 (6.7L Turbo Diesel) For 2010-2018 Ram 2500 (6.7L Turbo Diesel) For 2011-2018 Ram 3500 (6.7L Turbo Diesel)
Configuration:
Material: T304 Stainless Steel Surface Finish: Semi Polished Style: Intake Manifold Elbow Wall Thickness: 16-Gauge Inlet/Outlet: 3.50" OD / 3.00" OD 50-200 degrees F drop in EGT's 2 NPT ports 0.5-1 MPG increase Unobstructed 3.5" inlet to two 3" mandrel bent tubes Perfect match for the original car Stable characteristics, high reliability Faster turbo spool Significant gain in throttle response Pipe Precisely Indented for Dip Stick Line Clearance Comes in a sealed package, ready to install Fully TIG welded with precise settings to produce optimal penetration without impacting airflow
Installation Note:
factory emissions equipment will not be in-use as this manifold does not have provisions to use any of it
Product Description:
Intake Manifold for 2007(May) to 2018 Dodge 6.7L Cummins is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. This design also enabled the use of a short bolt in place of the long driver-side flange bolt that passes right through the center of the stock manifold air plenum. Thus freeing up airflow even more yet maintaining the stock six bolt pattern for a proper seal. The twin tube design nearly doubles the outlet size of the stock manifold while minimizing the impact of the initial section of the number one injector line.
${isCart ? 'The items in the shopping cart do not participate in any recommendation rule. Add the participating items to your shopping cart to check the design.' : ''}
${isProduct ? 'This product did not participated in any recommendation rule. Switch to another product to check the design.' : ''}
${isCollection ? 'The items in this collection do not participate in any recommendation rule. Switch the participating items to check the design.' : ''}
${isIndex ? 'The home page do not participate in any recommendation rule.' : ''}
(This prompt would not display on client-side)